Label Specifications
PRESSURE SENSITIVE LABELS SPECIFICATIONS
TRAILERS #1 and #2
Machine Type: Impresstik VAC 3000
The Impresstik Labeler uses vacuum belt technology on a linear style machine.
This provides good quality label application on most all round glass containers.
IMPORTANT When creating a label to apply to a tapered bottle you should
consider printing front and back labels on separate webs. This allows
us to adjust for skewed labels on an individual basis. Crowning and tapering
the labels for tapered bottles will also produce the best label application.
The following printing specifications are required for labels to run smoothly on our machines:
- Front and back same web, or front and back labels will be printed
on separate webs.
- Same web when not using tapered bottles.
- Labels to be wound Industry Standard #4
(Labels face outside roll with left edge on either label leading).
- A minimum of 1/8 inch Spacing between Labels for electronic sensing.
- Label rolls must not exceed 14 inches in overall diameter or excessive
waste might occur
- Maximum overall label height is 6 inches. Minimum overall label height
is 3/4 inch
- Minimum label width is 2 inches
- Center of label core is 3 inches
- Although this machine will apply virtually any size label, You
must be aware that large labels will find the imperfections in the glass.
This may cause bubbles in the labels. For best results, multiple smaller
labels are advised
- Please inquire with Select Mobile Bottlers, Inc. regarding Clear
Film Labels and their compatibility with our equipment. Clear labels
tend to trap air pockets that remain visible through the label. Generally
samples are required 60-days in advance for testing.
- We Recommend a maximum of 60-lb lable stock; if heavier, we will need samples to check for compatibility with the labeler.
IMPORTANT
We are not responsible for the quality of your label printing process.
We use top of the line equipment, Impresstik Vac 3000, one of the 'Best'
in the world which provides good quality label application.
The winery is
responsible for the following issues with their labels and the printing
thereof:
- Die strike issues
- Release issues
- Adhesive Issues
Select Mobile Bottlers, Inc. will not accept liability for label issues after bottling, due to cold and or damp storage of finished case goods.
Roll Chart for Wine Label Unwinding for the Impresstik Labeler No. 4 - Outside Left
